Zetor Forterra HD
The forterra HD comes with a 2 year or 2400 hour warranty and are currently available in the following models:
130HD - 130hp
140HD - 140hp
150HD -150hp
ENGINE
The new Forterra HD series is equipped with an economical 16-valve four-cylinder Zetor engine with extremely
low brake-specific fuel consumption (already used for the HSX model), placing it at the forefront of the competition. The Forterra HD 150 employs an in-line injection pump with electronic control. Unlike a mechanically operated controller, the electronic controller cuts fuel consumption and optimises torque.
CAB
A major innovation for the Forterra HD series is the ergonomic, multiple-function control panel. Situated
on the right of the cab, the driver has everything comfortably at hand, from hydraulics controls to activating
automatic headland turning. Everything is intuitive and easy to operate.
AXLES
To achieve greater load-bearing capacity, the drive housing has been reinforced and the rear axle has been extended by 226 mm for 1,800 to 2,000 track widths. The tractor is heavier, more stable and bears greater loads on the three-point hitch. The front driven axle contains a 100% differential lock. Optional front axle gearbox spring suspension in combination with a spring-mounted cab makes the drive even more comfortable. The wheelbase extension to 2,700 mm provides excellent weight distribution and therefore the high
stability required for effective work.
HYDRAULIC SYSTEM
The auxiliary four-part distributor with electric and hydraulic control represents another innovation. In combination with the Category III hitch, it offers you a wide selection of available implements. To make field-work easier, the tractor is equipped with automatic headland turning.
PTO
For more effective use of implements, the front PTO power transmission has been increased up to 90 kW. The rear PTO clutch is equipped with acceleration feedback control. This provides easier and more comfortable starting, and the clutch receives a lower mechanical load.
MODEL 130 140 150
ENGINE
Stage III B Type Zetor 1506 Zetor 1606 Zetor 1716
Homologated Power (2000/25/EC) (kW / HP) 93 / 127 100 / 136 108 / 147
Rated speed (rpm) 2,200
No. of Valves 16
No. of Cylinders 4
Aspiration turbocharged
Bore/ Stroke (mm) 105 /120
Displacement (cm³) 4,156
Max. Torque (2000/25/EC)/
Torque Reserve (ECE R24) (Nm / %) 551/41 581/38 589/30
POWER SHUTTLE
Type multi-plate wet clutch
Control electrohydraulic
TRANSMISSION
Type mechanical with three-stage Powershift,
Power Shuttle wet plate dual clutch
Power Shuttle under load, at speed up to 10 kph
Shifting fully synchronized
Number of gears (forward / reverse) 30 / 30
Speed (kph) 40
PTO
Type independent, multi-plate PTO clutch
Rear PTO revolutions (rpm) 540/540E/1,000/1,000E,
optional 540/1,000 dependent
Front PTO revolutions (rpm) 1,000
Front PTO power transmission of up to 90 kW
HYDRAULICS
Type Bosch electronics with Zetor HitchTronic, 2 auxiliary cylinders
Three-point hitch category III
Control electrohydraulic
Lift capacity at the end
of lower links (kN) max. 85
Operating pressure MPa 20 +0,2
Hydraulic pump capacity (l / min) 85 / 120 (gear / axial optional)
Hydraulics quick couplings 4 pairs + 1
Hitch system
level bracket of swivel hitch; optional hitch for single-axle trailer, piton fix 50, K-80,
tiltable drawbar, automatic tail piece, manual tail piece
CABIN
Type fixed standard; suspension optional
Noise level (dB(A)) max . 76
Roof with window standard
Seat Grammer Maximo Standard
Standard passenger seat with belt standard
Air-conditioning manual (standard)
Steering wheel tiltable and telescopic
Dashboard standard
OTHER SPECIFICATION
Drive system 4WD
Steering Hydrostatic
Front drive axle with 100% lock
Front wheels brake clipped to front drive axle through hydraulic clutch
Trailer brakes air-pressure trailer brakes 2+1 optional
Fuel tank (l) 220
DIMENSIONS AND WEIGHT
Wheelbase (mm) 2,720
Front axle spacing (mm) 1,800 – 2,200
Rear axle spacing (mm) 1,800 – 2,000
Length without the weight hanger (mm) 5,235
Height up to upper edge of exhaust (mm) 2,842
Curb weight without weights (kg) 4,820
Front tyres 380 / 85 R24 (14.9 R24)
Rear tyres 460 / 85 R38 (18,4 R38)
OTHER OPTIONAL EQUIPMENT
- selection of front and rear tyre sizes
- front and rear weight packages
- front three-point hitch
- front PTO with clockwise or counter-clockwise
- direction of rotation
- broad selection of implement hitches
- from CBM modular system
- hydraulic trailer brakes
- flashing beacons
- pneumatic seat
Downloads
You may need to download Adobe Reader to view files in PDF format, or Microsoft viewer software to view Word, Excel or Powerpoint files.